GfS DEXCON for Panic Bars with pre alarm

• Easy assembly
• Pre-alarm raises the barrier against abuse
• Alarm shutdown via system key
• Battery supply incl. Battery monitoring unit, no cables required
• Tamper protected by alarm switch in housing
• Optically and acoustically large barrier against abuse
• Wireless transmission is possible
• Perfectly applicable in existing and renovation construction
• Mounting possible via adhesive tape (without screws)

Delivery includes:
• 1 x GfS DEXCON for panic bars
• 1 x Adjustable corner profile with safety cord
• 6 x Red top plates
• 1 x 9V block battery
• 2 x System key
• 1 x STOP sticker
• 7 x screws for mounting

The GfS DEXCON for panic bars is easy to install without an E-installation but with battery power as a complete system. The red corner profile behind the panic bar secures the panic bar. The STOP icon warns against unauthorized use. The GfS DEXCON is equipped with a pre-alarm, this alarm will activate even if the panic bar is touched lightly. The pre-alarm automatically stops as soon as the panic bar is released. If the panic bar is pushed, the main alarm will activate. At the same time, the angle profile will drop and an acoustic signal of 75dB / 1m. sounds. The alarm can only be switched off by an authorized person using the system key. To reactivate the GfS DEXCON you must place the corner profile back on the system with a new red top plate. A battery monitoring unit which activates at a voltage below 7.5 V gives for 10 days. a beep, this is a standard function. External power is also possible.