GfS DEXCON for all doors and windows with wired door reed contact
• Easy installation with all doors
• Increases the visual barrier against abuse
• Alarm shutdown via system key
• Battery supply incl. Battery monitoring unit, no cables required
• Tamper protected by alarm switch in housing
• Optically and acoustically large barrier against abuse
• Wireless transmission is possible
• Perfectly applicable in existing and renovation construction
• Mounting possible via adhesive tape (without screws)
• "Door stays open too long" alarm
Delivery includes:
• 1 x GfS DEXCON
• 1 x Door drove contact (magnet) 2 m. Cable
• 1 x 9 V block battery
• 1 x Electronic switch and 2 system keys
• 1 x STOP sticker
• 7 x screws for mounting
The GfS DEXCON with door reed contact is easy to install on all windows and doors without E-installation but with battery power as a complete system. Door position signaling takes place through a magnetic contact on the door style and the frame. The STOP icon warns against unauthorized use. If the door is nevertheless opened, the main alarm will activate an acoustic signal of 75dB/1m. or 95dB/1m. sounds. The alarm can only be switched off by an authorized person using the system key. To reactivate the GfS DEXCON you must reset the system with the system key. A battery monitoring unit activates at a voltage below 7.5V and gives for 10 days. a beep, this is a standard function. External power is also possible.